1 - Put Taranis into Bootloader mode
- Power off
- Power on while pressing both trims inward
 |
| Pressing trims inward while powering |
New drives (like E: and F:) will appear in file system
3 - Create a new folder on root of E: named FIRMWARE
4 - Copy all firmware (*.frk) files into this directory
Download site for FrSky devices: http://www.frsky-rc.com/download/
5 - Disconnect Taranis and power off
2 - Connect S.Port Device to Taranis
Taranis Pinout (From top to Bottom):
| PPM | PPM/PXX/DSM Output | |
| HEARTBEAT | Sbus / CPPM Output | |
| BATT | Switched Battery Voltage | red |
| GND | Ground | black |
| SPORT | Telemetry Output | orange |
Connect to SPORT device using standard servo cable
BATT - VCC
GND - Ground
SPORT - Signal
3 - Download Firmware to Device
1 - Power on Taranis normally
2 - Navigate to Radio Setup page by long pressing Menu button
3 - Navigate to SD Card menu by Page button
4 - Navigate to newly created FIRMWARE folder by +- buttons, ENT to enter
5 - Select the correct firmware file for the connected device by ENT button
6 - Select Flash External Device from menu
7 - Wait till download is competed and disconnect device.